HPI Plazma 11.1v 3200mAh 35C LiPo Battery
LiPo Charging: Always use a LiPo compatible charger when charging your Lithium Polymer (LiPo) batteries. Be sure to select the correct chemistry/setting for the LiPo battery you are charging, as charging on the wrong setting can cause violent fires if left unattended. Please use extreme caution and never charge LiPo batteries unattended. We also recommend using a LiPo Safe/Protection Bag while charging your LiPo batteries.
The HPI Plazma range of battery packs is growing, with several new options available for hobbyists and racers! This LiPo pack features the most power ever offered in the Plazma fun range - 3S 11.1 volt power at a staggering 95C discharge, the same as our competition line of Plazma Pro batteries! It also features a high quality T-Plug connector and a universal balancing plug for simple maintenance.
Voltage: 11.1V
Capacity: 3200mAh
Current Rating: 35C
Case Type: Extended rectangular LiPo case, sealed plastic
Dimensions: 138.6 x 45.8 x 25.1mm (conforms to BRCA 139 x 47 x 25.1mm)
Plug: High quality T-Plug for extreme high-power applications
Note: LiPo batteries must be charged with a LiPo-compatible charger
Check out the full range of HPI Plazma batteries!
| Battery | |
|---|---|
| Cell Voltage: | 3.7V |
| Total Voltage: | 11.1V |
| Capacity: | 3200mAh |
| Discharge C Rating: | 35C |
| Chemistry: | LiPo |
| Connector: | Deans |
| Length: | 138mm |
| Width: | 46mm |
| Height: | 25mm |
| Weight: | 265g |
| Main Connector Wire Gauge: | 12AWG |
| Lithium Case: | Hard Case |
| Balance Lead Connector: | XH |
| Stick Size: | Yes |
| R.O.A.R Approved: | No |
There are no reviews for this product yet.
