Scalextric Digital represents a ground-breaking step forward in the way Scalextric is played. With the DIGITAL system, up to six cars can race on one lane. At the press of a button, drivers can switch lanes for overtaking and blocking. Most cars produced from 2007 onwards have a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a Scalextric Digital layout.

The C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. The conversion only requires a small screwdriver and takes less than sixty seconds.

• Plug and play solution — digitises DPR Scalextric cars in under sixty seconds
• Can be transferred easily from one car to another
• No soldering iron or modelling expertise required

Installation steps:

1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis.

The C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars only. To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006.