Scalextric Digital represents a ground-breaking step forward in the way Scalextric is played. With the DIGITAL system, up to six cars can race on one lane. At the press of a button, drivers can switch lanes for overtaking and blocking. Most cars produced from 2007 onwards have a socket on the car where the F1 EasyFit Digital Plug is connected to convert the car for use on a Scalextric Digital layout.

The C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. The conversion only requires a small screwdriver and takes less than sixty seconds.

• Plug and play solution — digitises DPR Scalextric cars in under sixty seconds
• Can be transferred easily from one car to another
• No soldering iron or modelling expertise required

Installation steps:

1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis.

The C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars only. To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006.