Electric 1:8 scale buggy is one of off-road's most popular racing classes. The designers of Team Associated Area 51 Design Works have produced the RC8B3.2e electric 1:8 scale buggy. The geometry of the suspension has been critically analyzed, resulting in a new suspension arm design with inserts to adjust flex characteristics and keep dirt out. A longer rear suspension arm, narrower suspension arm mounts, and an overall wider rear track width has proven to increase driver comfort, consistency, and speed. Updated shock caps allow the RC8B3.2e to be run in two different configurations: emulsion type with the bleeder screw and seal, or bladder type with the included new stiff bladders. The side guards have been improved with FHCS that thread into the chassis from the top, increasing durability and improving alignment.

• New suspension arm design with inserts for flex adjustments
• Longer rear suspension arm length with narrow rear arm mounts
• New stiff shock bladder design improves jumping and handling performance
• Updated shock cap works for bladder or emulsion style shock setups
• Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws
• I.F.M.A.R.-approved rear wing
• 42T ring and 12T pinion gears on front and rear differentials for improved gear ratios
• Updated chassis with chamfered front edges to reduce drag
• Side guards are now threaded into the chassis from the top side of the car
• Two-piece sliding motor mount for easy gear mesh adjustment and motor removal
• 90% parts compatibility with RC8B3.2

• 7.4V LiPo Battery
• LiPo Charger
• 4 x AA Batteries
• 1:8 scale electric motor
• Electronic Speed Controller (ESC)
• Radio transmitter & receiver
• 2-channel receiver
• Servo
• 1:8 scale 12mm hex wheels
• 1:8 scale tires
• CA glue for tires and wheels
• Thread-locking compound
• 1:8 body

The body shell comes completely unpainted and may or may not require body post holes to be drilled. Only use a polycarbonate-style paint such as the Tamiya PS series to finish these bodies, as standard paints will not adhere and/or cause damage to the body shell's surface.