Hangar 9 RC Plane Ultra Stick 2m 3D Aerobatic ARF
Hangar 9 RC Plane Ultra Stick 2m 3D Aerobatic ARF
Oversized, double-bevelled controls for extreme 3D
Quad-flap setup for flaperon and crow mixes
Versatile power options for 30-36cc gas or electric
Strong balsa/ply construction, float-ready
Assembly and flight designed for experienced pilots
The Hangar 9 Ultra Stick 2m ARF builds on a legacy that revolutionised the "Stick" genre. This isn't just another sport plane; it's a giant-scale 30cc airframe designed for intermediate to expert pilots who demand a truly wide flight envelope. It features durable, lightweight balsa and plywood construction and is covered in genuine UltraCote for a finish that lasts. Its design genius lies in its versatility. You can set it up as a mild-mannered sport flyer or, with a few tweaks, a full-on 3D machine. The two-piece plug-in wing makes transport to the field easy, and the tough tail dragger landing gear looks great and handles grass strips with ease.
Where the Ultra Stick truly shines is its control. The oversized control surfaces are all double-bevelled, allowing for massive 3D throws. Furthermore, the wing is designed for a quad-flap setup, letting you take full advantage of flaperon and crow mixes. This opens up a new world of flight possibilities, from steep descents to incredibly slow flight. The package includes hardware and mounting options for both a 30-36cc petrol engine or a Power 160-size electric system. It's even float-ready, with built-in hard points for the optional Hangar 9 1/5-scale floats. This is the perfect ARF for the pilot who loves to tinker and wants one plane that can do it all.
A modern take on the tried-and-true giant-scale Ultra Stick design
Oversized, double-bevelled control surfaces for a wild 3D flight envelope
Flap-equipped wing allows for flaperon and crow mixing options
Strong yet lightweight balsa and balsa-plywood construction
Two-piece plug-in wings with aluminium tube for easy transport
Finished fibreglass wheel pants and a sporty tail dragger configuration
Pre-installed hard points for mounting the Hangar 9 1/5-scale floats
Includes hardware for both 30-36cc petrol engines and electric power
Covered in genuine UltraCote film for a durable, high-quality finish
Genuine Hangar 9 Product
Wingspan: 205cm (80.75")
Length: 188cm (74")
Weight: N/A
Material: Balsa/Balsa-Plywood
Propulsion: 17x6 - 18x10 Propeller (Sold Separately)
Motor: Power 160 Brushless Motor or Petrol Motor (Sold Separately)
ESC: N/A
Completion: Almost Ready-To-Fly
1x Hangar 9 Ultra Stick 2m 30cc ARF Airframe
1x Electric Motor Mount
1x Complete Hardware Package
1x Product Manual
1x 6+ Channel Radio System (Transmitter and Receiver)
1x 30-36cc Gas/Petrol Engine OR Power 160 Electric Motor
1x 17x6 to 18x10 Propeller
8x Standard Servos
1x Receiver Battery (if gas) OR 1x 10S 4400mAh LiPo (if electric)
1x Compatible ESC (if electric)
1x 76mm (3") Spinner
1x Tools and Adhesives for Assembly
Please refer to the instruction manual for specific waterproof standards, safety precautions, and operating instructions.
This is an Almost Ready-To-Fly (ARF) aircraft and requires final assembly, electronics installation, and setup.
This is a Skill Level 3 aircraft, recommended for experienced pilots only.
-
Transmitter Channels
- Ch
-
Power TypePropulsion Type
- Propeller
-
Receiver Channels
- Ch
-
Plane Type
- Civilian, 3D Aerobatic
-
Skill Level
- Experienced
-
Retractable Wheels
- No
-
CompletionRTF is Ready To Fly (comes with everything). BNF is Bind N Fly (you need a compatible remote). PNP is Plug and Play (you need a radio set, battery & charger). Kits typically don't come with electronics.
- Almost Ready to Fly
-
Length
- 1880mm
-
Motor TypeType of Motor
- Brushless, Petrol
-
Battery Connector
-
Max LiPo Power
- 10S (37V)
-
Wingspan
- 2050mm














