HPI Plazma 14.8v 5100mAh 40C LiPo Battery
LiPo Charging: Always use a LiPo compatible charger when charging your Lithium Polymer (LiPo) batteries. Be sure to select the correct chemistry/setting for the LiPo battery you are charging, as charging on the wrong setting can cause violent fires if left unattended. Please use extreme caution and never charge LiPo batteries unattended. We also recommend using a LiPo Safe/Protection Bag while charging your LiPo batteries.
The HPI Plazma range of battery packs is growing, with several new options available for hobbyists and racers! This pack is custom-built for any dual-pack kits that require the batteries to side side by side, such as the Vorza and Trophy buggies. It's the same size as two LiPo hardcase batteries, but is just one piece with one set of battery leads. It also features a high quality T-Plug connector and a universal balancing plug for simple maintenance.
Voltage: 14.8V
Capacity: 5100mAh
Current Rating: 40C
Case Type: Rectangular LiPo case, sealed plastic
Dimensions: 138.6 x 45.8 x 50mm
Plug: High quality T-Plug for extreme high-power applications
Note: LiPo batteries must be charged with a LiPo-compatible
Battery | |
---|---|
Voltage: | 14.8v |
Capacity: | 5100mAh |
Discharge C Rating: | 40C |
Chemistry: | LiPo |
Length: | 139mm |
Width: | 46mm |
Height: | 50mm |
Weight: | 571g |
Cell Voltage: | 3.7v |
Connector: | Deans |
Main Connector Wire Gauge: | 12AWG |
Lithium Case: | Hard Case |
Balance Lead Connector: | XH |
R.O.A.R Approved: | No |