Name: Hobbywing QuicRun WP-880 80A Dual Motor Waterproof Brushed ESC
Brand: Hobbywing
SKU: HW-30120301
Price: 83.69 AUD
Availability: InStock

Overview

Hobbywing QuicRun WP-880 Dual Brushed Crawling ESC. Fully waterproof dual-output ESC designed for 1/10th vehicles and MOA style competition crawlers running brushed motors.

Note

Safety Notice: Brushless electric motors & ESCs have huge amounts of torque at any given RPM. Using too-tall gearing, or a vehicle that is too large/heavy, can result in damage and/or product failure. Please consult your manual and select gearing suitable for the vehicle and terrain, as damage caused by overloading or abuse is unlikely to be covered by the manufacturer's warranty. Always monitor your ESC and motor temperatures closely after modifying your system to ensure they stay within the safe operating limits.

Dual Motor Note: WP-880-DUAL BRUSHED ESC has two outputs to drive 2 motors. When driving 2 motors simultaneously, the Turn of the motors needs to be increased.

Features

Fully waterproof design for all conditions (clean and dry after use to avoid rusty connectors)
HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allow internal heat to be quickly transferred to the aluminum heat sink for great heat dissipation
Built-in switch-mode BEC with continuous current of 4A
Tunable drag brake and drag brake rate for different vehicles, tracks, and control feel
Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel
9 levels of acceleration/punch from soft to aggressive for different vehicles, tires and tracks
Proportional brake with 9 levels of initial brake force, maximum brake force, and drag brake force
Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection
Separate programming port to easily connect the LED program card to the ESC
ESC programming via HOBBYWING LED Program Card

Specifications

Cont./Peak Current	80A/400A
Motor Type Supported	Brushed Motor (540, 550, 775 Size Motor)
Applicable Car	1/10th Vehicles & MOA style comp crawlers
	Brushed Motor Limit with 2S LiPo / 6S NiMH: ≥12T or RPM<30000@7.4V (540, 550 Size Motors)
	Brushed Motor Limit with 3S LiPo / 9S NiMH: ≥18T or RPM<20000@7.4V (540, 550 Size Motors)
	Brushed Motor Limit with 4S LiPo / 12S NiMH: ≥24T or RPM<15000@7.4V (540, 550 Size Motors)
LiPo / NiMH Cells	2–4S LiPo or 5–12S NiMH
BEC Output	6A@4A (Switch-Mode)
Connectors	Input End: No Connectors; Output End: 4.0mm Female Bullet Connectors
Size / Weight	45.9x34.7x26.5mm / 75g
Programming Port	Separate Port
Waterproof	Yes

ESC (Electronic Speed Controller)

For Motor Type	Brushed
Max Voltage	14.8V
Waterproof Design	Yes
Continuous Amps	80A
Motor Connectors	4.0mm Bullet
Battery Connector	Bare Wires
LVCLow Voltage Cut-Off. Required for Lithium batteries.	Yes
Programmable	Yes
Cooling Method	Air
BEC Voltage	6V
Dual Motor	Yes