Maverick Strada XB RC Buggy Electric Brushless 4WD 1/10 Scale RTR
Maverick Strada XB RC Buggy Electric Brushless 4WD 1/10 Scale RTR
The Maverick Strada XB Brushless is a fully-featured racing buggy with durable front and rear bumpers that provide plenty of protection on the track, plus an extra-large moulded rear wing for downforce at high speeds. Stylish multi-spoke black wheels are wrapped with grippy racing tires studded with unique mini-pin tread blocks perfect for a wide range of off-road track conditions.
The Strada Brushless line-up features a brushless electronics group including the powerful MM-22BL 3215KV brushless motor fitted with a black laser-etched case and 4mm gold-plated plugs, plus the strong MSC-30BL-WP brushless waterproof ESC. Each Strada Brushless vehicle features a moulded tub chassis providing durability and a stable, rugged platform for a strong 4WD shaft drivetrain. Pre-built oil-filled shock absorbers and dual-wishbone independent suspension front and rear give supreme confidence on all driving surfaces. The MS-22 servo controls steering through a dual-point system with an integrated servo saver to protect against crash damage.
The Strada 4WD drivetrain uses efficient ball bearings for maximum runtime and efficiency, and features a moulded gear cover to keep dirt and debris away from the gears. Front and rear gear differentials quickly transfer the motor's power to the pre-mounted tires at all four corners.
The Strada XB Brushless is a fully-featured racing buggy with durable front and rear bumpers and an extra-large moulded rear wing for downforce.
The MM-22BL 3215KV brushless motor and MSC-30BL-WP waterproof ESC deliver impressive power and reliability.
The moulded tub chassis and 4WD shaft drivetrain with oil-filled shock absorbers provide durability and stable performance on any surface.
- MM-22BL 3215KV brushless motor with 4mm gold-plated plugs
- MSC-30BL-WP brushless FWD/Brake/Reverse Waterproof ESC
- LiPo-compatible speed controller (see manual for instructions on how to change between NiMH & LiPo modes) with LiPo safety cut-off
- MBP-26 3000mAh Ni-MH battery
- MS-22 high-strength steering servo
- MTX/MRX-243 2.4GHz transmitter and receiver with built-in failsafe
- Moulded tub chassis with optimised weight distribution
- Fully adjustable suspension
- Tough battery strap
- Four oil-filled rebuildable shocks with coil-over springs
- Aluminium gold anodised shock tops
- Fully independent double-wishbone suspension
- Tough C-hub front steering knuckles
- Tough, efficient 4WD shaft drivetrain
- Drivetrain fully equipped with ball bearings
- Aluminium gold anodised upper deck
- Aluminium gold anodised lightweight centre shaft
- Pre-cut body factory-finished
- Fully adjustable turnbuckles all round
- Front and rear moulded bumpers
- Twin-point bellcrank steering with integrated servo saver
- Moulded 1-piece rear wing
- Moulded protective gear cover
- 1x Strada XB Electric Brushless 4WD Off-Road RTR RC Buggy
- 1x 7.2V 3000mAh Ni-MH Battery Stick Pack
- 1x USB Charger
- 4 x AA Batteries
-
Length
- 380mm (14.9")
-
Width
- 260mm (10.2")
-
Height
- 180mm (7.06")
-
Wheelbase
- 270mm (10.6")
-
Weight
- 1.50kg (3.30lbs)
-
Scale
- 1/10
-
Max LiPo Power
- 2S (7.4v)
-
Completion
- Ready to Run
-
Skill Level
- Beginner
-
Power Source
- Electric Brushless
-
Chassis Type
- Buggy
-
On/Off Road
- Off Road
-
Drivetrain
- 4WD
-
Battery Connector
- Deans
-
Wheel Hex Size
- 12mm
Parts
4 out of 5 stars
5 out of 5 stars