New Super Avante On The All New TD4 Chassis

Tamiya is delighted to announce a brand new 1/10 R/C 4WD off-road buggy model. It employs the newly designed TD4 chassis and a stylish body produced by Kota Nezu, who has contributed to a number of popular Tamiya products.

A Super New Face

This R/C model assembly kit creates the Super Avante, a 4WD off-road buggy that is bestowed with Tamiya's legendary Avante name. It features an exceptionally low profile design enabled in part by its front inboard suspension, with a shaft-driven 4WD drivetrain powered by a midship motor and employing front/rear ball differentials plus full ball bearings. Its futuristic body design is the work of Kota Nezu at znug design, and features numerous clear sections that just add to the Super Avante's distinctly modern mood, as do the cockpit-rear buttress and the four mini fenders.

• Pre-Painted Body Shell.
• This is a 1/10 R/C assembly kit.
• The eye-catching polycarbonate body (inspired by Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of znug design.
• Newly designed shaft-driven 4WD chassis based on the one-piece monocoque frame features the same ball differentials for front and rear, and features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
• The TD4 chassis also employs an front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form.
• The four wheel double wishbone suspension system uses CVA oil dampers for superlative performance.
• Features full ball bearings.
• Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup.
• Turnbuckle shafts for use with upper arms facilitate camber angle adjustment.
• Star dish wheels are paired with square spike tires which offer superlative grip off-road.
• Choose between high and low type wing stays to adjust the downforce depending on the road surface.
• Comes with a driver figure for extra realism, and high-torque servo saver.

• Length: 387mm, width: 246mm, height: 117mm (with low wing stays employed).
• Wheelbase: 283mm.
• Tread: 214mm (front), 205mm (rear).
• Plastic bathtub frame.
• Shaft-driven 4WD.
• Front & rear ball differentials.
• 3-piece steering tie-rod.
• 4- wheel double wishbone suspension.
• Tire width/diameter: 32/82mm (front), 41/82mm (rear).
• CVA oil dampers.
• Gear Ratio = 10.71:1.
• Type 540 motor.
• Electronic Speed Controller (ESC) is sold separately.

• 2-channel R/C system w/ESC
• R6/AA/UM3 batteries for transmitter
• Battery pack & charger