1:10 scale 2WD off-road has been Team Associated's signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 13 of the 18 I.F.M.A.R. World Championships contested. With the RC10B6.4 project, engineers had the goals of improving jumping and landing, updating the steering feel to be "easy to drive fast," and making the buggy corner faster on high-grip carpet and clay. The RC10B6.4 platform includes the next generation 13mm diameter big-bore shocks and springs for the ultimate in damping and stability. The chassis, front end, and steering system are optimised for running reduced caster and kick up, which excels on high-speed, high-grip surfaces. An updated steering system with adjustable height bellcranks helps racers minimise bumpsteer. The front suspension is equipped with new -1mm kingpin offset steering and caster blocks for smooth and predictable front-end feel through the entire throw. The #90034 RC10B6.4 Team Kit is the buggy of choice for high-grip carpet or turf track surfaces with the new +3mm chassis layout, 11mm Octalock LCF slipper clutch setup, steel ESC and servo weights, and included anti-roll bars front and rear.

• 13mm big-bore threaded aluminium shocks and springs with machined shock pistons for improved bump and jump handling
• +3mm length aluminium chassis with 22.5 degree kick-up to complement updated front-end geometry, with new shape to reduce chassis scrub
• 20deg., 22.5deg., and 25deg. moulded bulkheads included for a complete range of caster and kickup options
• Adjustable height steering bellcrank and rack system for optimised bumpsteer at all ride heights and caster angles
• -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
• Steel RC10B6.4 ESC mounting tray shifted forward in the chassis with a wider footprint, resulting in a further forward weight bias
• Front ballstud mount, top plate, and front wing mount to account for the kickup angle change
• Chassis side rails with 3 optional fan mount locations
• Cab-forward design RC10B6.4 body shell offered in standard (kit) and lightweight (optional) thickness
• Front and rear anti-roll bars included
• 4mm carbon fibre front and rear shock towers with moulded protective covers
• Steel servo weight for low CG and forward weight bias
• Aluminium servo mounting system with direct-to-chassis mounts and moulded brace with transponder mounting location
• Octalock spur gear and 11mm Octalock LCF pads
• Wide pivot rear aluminium arm mounts for use with 73mm arms and 69mm CVA bones
• Symmetric rear arms with improved geometry and stiffness that can be flipped to allow a "split" for rear shock mounting position, available in 73mm and 75mm lengths (73mm included)
• Rear hub assembly with modular vertical ball stud camber link mounts and axle height adjustments
• Outer rear hinge pins captured with bolt head and locknut for increased durability
• Rod end battery brace parts and hardware included in kit
• Moulded wire clips included for motor and ESC wires
• +1 carbon fibre steering arms
• Black steel LP serrated wheel nuts
• 69mm CVA bones for reduced bone plunge and minimised friction at drive pin
• Clear body and clear wing included
• Front wing mount and front wing included
• 5mm aluminium clamping wheel hexes
• Fluid-filled gear differential
• Adjustable differential height to allow drive shaft alignment through all ride height and axle height configurations
• Shocks include X-rings for low friction assembly
• Aluminium rear ballstud mount with three link positions for maximum adjustability and added strength
• Lightweight aluminium one-piece top shaft and gear
• Factory Team ball bearing set with 24 precision ball bearings, oiled for a more efficient drivetrain

• 1x RC10B6.4 Team Kit

Motor, battery, ESC, servo, receiver, wheels, tyres, fan, and pinion gear. Assembly and painting required.

This body shell comes completely unpainted and may or may not require body post holes to be drilled. Only use a polycarbonate style paint such as the Tamiya PS series to finish these bodies, as standard paints will not adhere and/or cause damage to the body shell's surface.