T200 comes ready to charge in the most compact design yet while taking up minimal space in the pit area. Only taking up about as much bench space as a pair of battery packs, the charger delivers dedicated 100W integrated power per each of the two complete charging circuits. Inside the case, there’s enough transformer power to fill two batteries simultaneously at up to 12 amps each, that you can pump life into everything from a receiver pack to a 6S LiPo or 15S NiMH or NiCD. All the programmability you expect of a modern higher-level charger is built in!

• DC Input Voltage: 11-18V
• AC Input Voltage : 100-240V
• Charge Wattage: 100W X 2
• Discharge Wattage: 10W
• Display Type: LCD
• Display Backlight: Blue 

Charge Voltage

• NiMH/NiCd: Delta peak detection 
• LiPo: 4.18-4.25V/cell 
• LiFe: 3.58-3.7V/cell 
• Pb: 1.8-2.0V/cell LiIon: 4.08-4.2V/cell 
• LiHV: 4.25-4.35V/cell

Discharge Cut-off Voltage

• NiMH/NiCd:0.1-1.1V/cell
• LiPo:3.0-3.3V/cell 
• LiFe:2.6-2.9V/cell LiIon: 2.9-3.2V/cell 
• LiHV: 3.1-3.4V/cell
• Battery Cutoff Temperature: 20ºC/68ºF-80ºC/176ºF(adjustable)
• Reading Voltage Range: 0.1-26.1V/cell
• Charge Current: 0.1A-12.0A
• Discharge Current: 0.1A-2.0A 
• Balance Cells: 2-6 cells 
• Balance Current: 500mA/cell 
• Safety Timer: 1-120minutes off 
• Charge Method: CC/CV for lithium types and lead(Pb) batteries Delta-peak Sensitivity for NiMH/NiCd.
• Memory: 10 different charge/discharge profiles