Name: Futaba Standard S-U301 S-Bus2 3.9kg 7.4V Servo
Brand: Futaba
SKU: FUT-S-U301
Price: 51.72 AUD
Availability: OutOfStock

Overview

Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Standard Digital and S.Bus2 Capable Servo with Accessory Pack.

Features

Compatible with a wide range of genres such as aeroplanes, helicopters, and cars.
Resin Gearing.
High voltage 7.9KG S.Bus servo.

In the box

1x S-U301 S-Bus2 Standard 3.9kg 7.4V Servo
1x Accessory Pack

Specifications

Torque (6.6V)	3.5 kg-cm (48.6 oz/in)
Torque (7.4V)	3.9 kg-cm (54.2 oz/in)
Speed	0.18 sec (6.0V) / 0.16 sec (7.4V)
Operating Voltage	6.0 ~ 8.4V DC
Weight	39g (1.38 oz)
Gear Type	Resin
Total Height (A)	36.1mm
Body Width (B)	40.5mm
Below Mount (C)	26.6mm
Above Mount (D)	9.5mm
Total Length (E)	54.3mm
Total Width (F)	20.6mm

Servo

SizeConventionally sized servo names	Standard
Gear Material	Plastic
Servo Spline Count	25Tooth
Waterproof Casing	No
Case Material	Plastic
Height (A)	36.1mm
Body Length (B)	40.5mm
Bottom to Under Mount (C)	26.6mm
Top to Under Mount (D)	9.5mm
Length (E)	54.3mm
Width (F)	20.6mm
Drive Motor Type	Brushed
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline	3.9
6V Sec/60 DegreesSeconds per 60 degrees of rotation	0.18
Signal Type	Digital