SkyRC S65 Smart Charger
SkyRC S65 Smart Charger
Compact 65W AC professional charger/discharger supporting LiPo, LiHV, LiFe, NiMH, NiCd and Pb, with embedded XT60 connector.
- 65W in a compact, angular design
- Supports LiFe/LiIon/LiPo/LiHV/NiMH/NiCd/Pb including new-generation LiHV
- Embedded XT60 connector for convenience and reverse-polarity protection
- AGM and cold charge modes for Pb batteries
- Three-decimal voltage display accuracy
SkyRC S65 AC Professional Charger/Discharger stands out for its angular design and compact size by packing a big power of 65 watts into such a small case. Compatible with a full range of the most popular battery types, including the new generation LiHV, the S65 keeps your batteries powered up with 6-amps of charging power.
- AGM & Cold Charge Modes for PB Battery: SkyRC S65 can charge AGM battery and also can be used for charging PB battery at very low temperatures.
- Embedded XT60 Battery Connector: By embedding the XT60 battery connector in the charger, it gets more convenient & safe for charging the most popular battery with XT60 connector and avoids the possibilities of reverse polarity.
- Smart & Efficient Cooling System: Temperature controlled 7000rpm high speed sleeve bearing cooling fan effectively blows the air through the extruded aluminium heat sink, effectively cooling the device.
- Higher Accuracy with Three Decimals for Battery Voltage: The charger firmware is highly optimized by displaying the battery voltage with three decimals during the process of charging & battery voltage measuring.
Do NOT plug a balance connector into the temp sensor port. Doing so will void the warranty and destroy the charger.
-
Compatible batteries
- LiFe/LiIon/LiPo/LiHV/NiMH/NiCd/Pb (AGM Charge and Cold Charge mode available for Pb)
-
Input Voltage
- AC 100-240V
-
Max Charge Power
- 65W
-
Max Discharge Power
- 10W
-
Charge Current Range
- 0.1-6A
-
Discharge Current Range
- 0.1-2A
-
Current Drain for Balancing Port
- Max 200mA
-
Trickle Charge Current
- NiMH/NiCd 50-300mA & OFF
-
LiPo/LiFe/LiIon/LiHV Cells
- 2-4S
-
NiMH/NiCd Cells
- 6-8S
-
Pb Cells
- 6-12V
-
Firmware Upgrade
- No
-
Output Connector Type
- XT60
-
Compatible With
- LiPo, Li-Ion, NiMH, NiCd, Pb, LiHV
-
Maximum Amps
- 6A
2 out of 5 stars
5 out of 5 stars
5 out of 5 stars
5 out of 5 stars
4 out of 5 stars