After a successful release of the RC8B3.2, the Area 51 engineers took the RC8 vehicle platforms to the next level with the RC8T3.2. The rear suspension arms have been lengthened to use the narrow pivot design. Bottom-loaded suspension arm inserts provide adjustable flex and keep the arms debris-free and easy to clean. A 4-piece center bulkhead allows for easier access to the center differential. A new rear shock tower has been developed to work with the new suspension arm geometry.

The all-new radio tray design has an enclosed battery box, a larger receiver box, integrated switch and transponder mounting, and adjustable flex configurations. Updated shock caps allow the RC8T3.2 to be run with the included new stiff bladders, standard bladders, or as emulsion with no bladders — all with the same cap.

• 1x Team Associated RC8T3.2 RC Truggy Nitro 4WD 1/8 Scale Kit

• .21 class rear exhaust engine
• Exhaust system: muffler and header joining pack, or muffler spring
• 2 or 3 channel radio/transmitter set with switch (FM/PCM/2.4GHz recommended)
• Transmitter batteries
• 4.8–7.4v receiver battery (flat style NiMH or flat style LiPo)
• Model car fuel (20–30% nitro recommended)
• Fuel bottle
• Glow igniter
• Starter box
• 1:8 scale buggy tyres
• 1:8 scale buggy wheels
• CA (cyanoacrylate) glue
• Polycarbonate-specific spray paint or bottled paint and airbrush
• Thread-locking compound (#1596)
• Steering servo
• Throttle servo
• Tools: Needle-nose pliers, Hobby knife, Reamer or hole punch, Ride height gauge, Body Scissors, Hex wrenches, Nut drivers, Wire Cutters, Calipers or a Precision Ruler
• Silicone Shock Fluid, Silicone Diff Fluid, Shock Shaft Pliers, 5pc Hex/Nut Driver Tool Set, Dual Turnbuckle Wrench, Tyre Adhesive

This is a kit and requires assembly. The body shell comes completely unpainted and may or may not require body post holes to be drilled. Only use a polycarbonate style paint (such as Tamiya PS series) to finish the body shell.