Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Specifications
Specification
TRA-2075 Servo Specifications
Total Height (A)
42.5mm
Body Width (B)
40.2mm
Below Mount (C)
27mm
Above Mount (D)
15.5mm
Total Length (E)
54.8mm
Total Width (F)
19.7mm
Servo
SizeConventionally sized servo names
Standard
Gear Material
Plastic
Servo Spline Count
25Tooth
Waterproof Casing
Yes
Case Material
Plastic
Height (A)
42.5mm
Body Length (B)
40.2mm
Bottom to Under Mount (C)
27mm
Top to Under Mount (D)
15.5mm
Length (E)
54.8mm
Width (F)
19.7mm
Drive Motor Type
Brushed
Rotational Degrees
120° (Normal)
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
9
6V Sec/60 DegreesSeconds per 60 degrees of rotation
0.17
Signal Type
Digital
Parts
Top parts for this Traxxas Standard Waterproof 9kg Servo