Power HD Blue Aluminium LW-30MG Standard 30kg 7.2v Metal Geared Waterproof Servo
Videos
Power HD Blue Aluminium LW-30MG Standard 30kg 7.2v Metal Geared Waterproof Servo
Power HD LW-30MG waterproof servo: 30 kg/cm at 7.2V, CNC aluminium body anodised blue, double ball bearings, 25T metal spline. 4.8–7.2V compatible.
The Power HD LW-30MG is a waterproof HV servo delivering 30 kg/cm torque at 7.2V, with stable performance, high torque, stronger locking force, less gear slop, double ball bearings, and a 25T metal spline. It is ideal for RC crawlers, boats, aircraft, and more. The full CNC machined aluminium body is anodised in Blue.
- Full CNC Machined Aluminium body
- Power HD Waterproof design
- Compatible with 4.8–7.2V voltage
- Anodised in Blue
- Genuine Power HD product
- Torque (4.8V): 18.0 kg-cm (250.0 oz/in)
- Torque (6.0V): 23.5 kg-cm (326.4 oz/in)
- Torque (7.2V): 30.0 kg-cm (416.6 oz/in)
- Speed: 0.18 sec (4.8V) / 0.16 sec (6.0V) / 0.14 sec (7.2V)
- Operating Voltage: 4.8–7.2V DC
- Weight: 62g (2.19 oz)
- Bearing Type: Ball Bearing x 2
- Motor Type: DC Motor
- Gear Type: Copper & Aluminium
- Operating Temperature: -20°C to 60°C
- Working Frequency: 1520μs / 333Hz
- Size: 40.5 x 20.5 x 39.3 mm (1.59 x 0.81 x 1.55")
- Total Height (A): 44mm
- Body Width (B): 40.6mm
- Below Mount (C): 27mm
- Above Mount (D): 17mm
- Total Length (E): 54mm
- Total Width (F): 20.3mm
- 1x LW-30MG Standard 30kg 7.2V Metal Geared Waterproof Servo
- 1x Hardware Set
Servos are powered by the ESC's output to the receiver. If you are using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience brown-outs where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver to smooth the current delivery. In some cases, you may need to install an external BEC.
-
Height (A)
- 44mm
-
Body Length (B)
- 40.6mm
-
Bottom to Under Mount (C)
- 27mm
-
Top to Under Mount (D)
- 17mm
-
Length (E)
- 54mm
-
Width (F)
- 20.3mm
-
SizeConventionally sized servo names
- Standard
-
Gear Material
- Aluminium & Copper
-
Waterproof Casing
- Yes
-
Servo Spline Count
- 25Tooth
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 30
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.16
-
Signal Type
- Digital
-
Drive Motor Type
- Brushed
-
Case Material
- Aluminium
-
Rotational Degrees
- 120° (Normal)
5 out of 5 stars
5 out of 5 stars
4 out of 5 stars
5 out of 5 stars
5 out of 5 stars
