Savox Standard 30kg Metal Geared Waterproof Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
- Total Height (A) = 40.2mm
- Body Width (B) = 40.6mm
- Below Mount (C) = 23.4mm
- Above Mount (D) = 13mm
- Total Length (E) = 54.5mm
- Total Width (F) = 20.2mm
| Servo | |
|---|---|
| Size: | Standard |
| Sec/60 Degrees: | 0.13 |
| 6V Torque kg/cm: | 30 |
| Servo Spline Count: | 25tooth |
| Gear Material: | Metal |
| Waterproof Casing: | No |
| Signal Type: | Digital |
| Drive Motor Type: | Coreless |
| Case Material: | Metal |
| Rotational Degrees: | 120° (Normal) |
| Total Height: | 40.2mm |
| Body Length: | 40.6mm |
| Bottom to Under Mount: | 23.4mm |
| Top to Under Mount: | 13mm |
| Total Length: | 54.5mm |
| Total Width: | 20.2mm |
1 out of 5 stars
2 out of 5 stars
3 out of 5 stars
4 out of 5 stars
5 out of 5 stars
5 out of 5 stars
***** badass servo, i have been using this for over a year as a solo steer in my Summit with very heavy louise mt uphills, and it has more power and speed that i will ever need.
