Savox SW-2210SG Standard 45kg 8.4V Metal Geared Waterproof Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
This waterproof, steel-geared servo is perfect for Monster Truck and most Scaler and Crawler applications where a slightly taller servo can be fitted. Precision steel gears, stump-pulling torque, and waterproof to IP67 standards (operates for up to 30 minutes in water up to 3 feet deep).
- Center aluminum with nylon composite top and bottom case
- Operates directly on 7.4v without the need for an eternal BEC
- Precision ball bearings
- Total Height (A) = 46mm
- Body Width (B) = 40.6mm
- Below Mount (C) = 29.2mm
- Above Mount (D) = 16.8mm
- Total Length (E) = 54mm
- Total Width (F) = 20.7mm
| Servo | |
|---|---|
| Size: | Standard |
| 7.4V Torque kg/cm: | 40 |
| 7.4V Sec/60 Degrees: | 0.11 |
| 8.4V Torque kg/cm: | 45 |
| 8.4V Sec/60 Degrees: | 0.1 |
| Servo Spline Count: | 25Tooth |
| Gear Material: | Steel |
| Waterproof Casing: | Yes |
| Signal Type: | Digital |
| Input Voltage Range: | 7.4VV, 8.4VV |
| Drive Motor Type: | Brushless |
| Case Material: | Metal |
| Rotational Degrees: | 120° (Normal) |
| Total Height: | 46mm |
| Body Length: | 40.6mm |
| Bottom to Under Mount: | 29.2mm |
| Top to Under Mount: | 16.8mm |
| Total Length: | 54mm |
| Total Width: | 20.7mm |
There are no reviews for this product yet.
