Savox SW-0240MG 1/5 35kg 7.4v HV Metal Geared Waterproof Servo
 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
- Total Height (A) = 67.7mm
- Body Width (B) = 65.8mm
- Below Mount (C) = 42.1mm
- Above Mount (D) = 25.6mm
- Total Length (E) = 81.8mm
- Total Width (F) = 30mm
Servo | |
---|---|
Size: | 1/5 |
6.0v Speed: | 0.18s |
6.0v Torque: | 28kg |
7.4V Sec/60 Degrees: | 0.15 |
7.4V Torque kg/cm: | 35 |
Gear Material: | Metal |
Waterproof Casing: | Yes |
Signal Type: | Digital |
Input Voltage Range: | 6V, 7.4V |
Case Material: | Metal |
Rotational Degrees: | 120° (Normal) |
Total Height: | 67.7mm |
Body Length: | 65.8mm |
Bottom to Under Mount: | 42.1mm |
Top to Under Mount: | 25.6mm |
Total Length: | 81.8mm |
Total Width: | 30mm |
1 out of 5 stars
2 out of 5 stars
3 out of 5 stars
4 out of 5 stars
5 out of 5 stars
5 out of 5 stars
So far it works great on my large scale Rc steering linkage