Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Specifications
SAV-SV-0236MG Servo Specifications
Total Height (A)
63.9mm
Body Width (B)
65.8mm
Below Mount (C)
40.4mm
Above Mount (D)
23.5mm
Total Length (E)
81.8mm
Total Width (F)
30mm
Servo
Gear Material
Metal
Servo Spline Count
15Tooth
Waterproof Casing
No
Input Voltage Range
6V, 7.4V
Case Material
Metal
Height (A)
63.9mm
Body Length (B)
65.8mm
Bottom to Under Mount (C)
40.4mm
Top to Under Mount (D)
23.5mm
Length (E)
81.8mm
Width (F)
30mm
Rotational Degrees
120° (Normal)
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
30
6V Sec/60 DegreesSeconds per 60 degrees of rotation