Savox SC-0252MG-Plus Standard 10.5kg 6V Metal Geared Servo
Videos
Savox SC-0252MG-Plus Standard 10.5kg 6V Metal Geared Servo
High-torque digital metal-geared servo with Soft Start and Sanwa SSR compatibility — 10.5 kg-cm at 6V.
- Digital servo with Soft Start and Sanwa SSR compatibility
- 10.5 kg-cm torque at 6V with metal gears
- Ball bearings for smooth, unrestricted movement
- Drop-in upgrade over plastic-geared servos
The Savox SC-0252MG is a high-torque, metal-geared, digital servo designed for standard RC applications. It serves as an excellent upgrade for standard, plastic-geared servos offering lower torque capabilities. “Plus” series servos feature Soft Start and Sanwa SSR compatibility, providing enhanced control and compatibility.
- Leading edge digital servo technology
- Accurate and fast response
- Ball bearings provide fluid and unrestricted movement
- Metal gears are durable and long lasting
- Spline size: 25T Spline
- Servo Technology: Digital
- Operating Voltage: 4.8V – 6V
- Motor Type: Brushed Motor
- Weight: 49g
- Gear Type: Metal Gears
- Servo Case: Black Plastic
- Torque @ 4.8V: 7.2 kg-cm (100 oz-in)
- Torque @ 6V: 10.5 kg-cm (145.8 oz-in)
- Speed @ 4.8V: 0.23 sec/60 deg
- Speed @ 6V: 0.19 sec/60 deg
- Connector type: JR/Futaba
- Total Height (A): 39.4mm
- Body Width (B): 40.7mm
- Below Mount (C): 28.3mm
- Above Mount (D): 17mm
- Total Length (E): 55.4mm
- Total Width (F): 20mm
- 1x Savox SC-0252MG-Plus Standard 10.5kg 6V Metal Geared Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
-
Height (A)
- 39.4mm
-
Body Length (B)
- 40.7mm
-
Bottom to Under Mount (C)
- 28.3mm
-
Top to Under Mount (D)
- 17mm
-
Length (E)
- 55.4mm
-
Width (F)
- 20mm
-
SizeConventionally sized servo names
- Standard
-
Gear Material
- Metal
-
Servo Spline Count
- 25Tooth
-
Input Voltage Range
- 4.8V, 6V
-
4.8V Torque kg/cm
- 7.2
-
4.8V Sec/60 Degrees
- 0.23
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 10.5
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.19
-
Signal Type
- Digital
-
Drive Motor Type
- Brushed
-
Case Material
- Plastic
-
Rotational Degrees
- 120° (Normal)
