ARRMA BLX 185A Waterproof 6S Brushless ESC w/ IC5 Connectors
ARRMA BLX 185A Waterproof 6S Brushless ESC w/ IC5 Connectors
The BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready. Fitted with reliable IC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management. The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
- Waterproof construction
- Built-in cooling fan for reduced heat during intense driving
- IC5 connectors
- Over voltage protection
- Two-stage LiPo cut off for added cell management
- 10AWG high-quality wires
- 6V BEC unit
- Three mode throttle profile (FWD/REVERSE/BRAKE)
- 3S, 4S and 6S LiPo compatibility
-
ESC Type
- 150AMP Continuous current capacity
-
Battery Usage
- 3S LiPo (11.1V), 4S LiPo (14.8V) or 6S LiPo (22.2V) Stick Pack
-
Recommended battery specification
- 5000mAh - 35C minimum per battery pack
-
Low Voltage Cut-Off (LVC)
- 3.2V Per Cell
-
Thermal Protection Temperature
- 105°C (221°F)
-
Over-Voltage Protection
- Over 6S LiPo (25.2V)
-
BEC Voltage
- 6V
-
BEC Current
- 3A
-
ESC Length
- 57.5mm (2.26")
-
ESC Height
- 38.9mm (1.53")
-
ESC Width
- 59.5mm (2.34") (Including hold-down tabs)
-
ESC Weight
- 196g (6.91oz)
-
Receiver Wire Length
- 200mm (7.87")
-
Battery Wire Length
- 165mm (6.5")
-
For Motor Type
- Brushless
-
Max Voltage
- 22.2V
-
Waterproof Design
- Yes
-
Continuous Amps
- 150A
-
Motor Connectors
- 4.0mm Bullet
-
Battery Connector
- IC5
-
LVCLow Voltage Cut-Off. Required for Lithium batteries.
- Yes
-
Programmable
- Yes
-
Cooling Method
- Fan
-
BEC Voltage
- 6V
-
Dual Motor
- No