Savox Orange Aluminium SA-1256TG Plus Standard 20kg 6v Coreless Metal Geared Servo
Savox Orange Aluminium SA-1256TG Plus Standard 20kg 6v Coreless Metal Geared Servo
Savox SA-1256TG Plus — orange aluminium 20kg coreless servo with Titanium gearing, soft start, and Sanwa SSR mode for RC planes.
- 20kg torque at 6V — high torque for demanding flying applications
- Titanium gearing for durability with minimal weight penalty
- Orange anodised aluminium centre case for heat dissipation
- Soft Start and Sanwa SSR compatible
- Minimal backlash for precise RC plane control
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Experience the difference with the Savox SA-1256TG Plus servo. This upgrade for RTR servos delivers exceptional performance with flying applications. Minimized backlash translates your control inputs with precision, leading to smooth and accurate flight. Its high torque tackles demanding maneuvers with ease, while robust construction ensures long-lasting durability. Soft Start and Sanwa SSR compatibility further enhances functionality and convenience. Take your RC plane's capabilities to the next level with the SA-1256TG Plus.
- Uniquely anodised in orange
- Aluminium centre case helps protect and keep the servo cool
- Features soft start and Sanwa SSR compatibility
- Features Titanium gearing for enhanced durability while minimising weight gain
- Suitable for aeroplanes
- Minimal backlash makes it a good addition to your RC plane
- 1x Savox SV-1250MG-Plus Micro 8kg 7.4V HV Coreless Metal Geared Servo
-
Spline size
- 25T Spline
-
Servo Technology
- Digital
-
Operating Voltage
- 4.8V - 6V
-
Motor Type
- Coreless Motor
-
Weight
- 64g
-
Gear Type
- Titanium Gears
-
Refresh Rate
- 333 Hz
-
Servo Case
- Orange Aluminium Middle w/ Plastic Top & Bottom
-
Torque @ 4.8V
- 16kg-cm (222.2oz-in)
-
Torque @ 6V
- 20kg-cm (277.7oz-in)
-
Speed @ 4.8V
- 0.18 sec/60 deg
-
Speed @ 6V
- 0.15 sec/60 deg
-
Connector type
- JR/Futaba
-
Total Height (A)
- 37.2mm
-
Body Width (B)
- 40.3mm
-
Below Mount (C)
- 24.4mm
-
Above Mount (D)
- 13.2mm
-
Total Length (E)
- 54mm
-
Total Width (F)
- 20.2mm
-
Height (A)
- 37.2mm
-
Body Length (B)
- 40.3mm
-
Bottom to Under Mount (C)
- 24.4mm
-
Top to Under Mount (D)
- 13.2mm
-
Length (E)
- 54mm
-
Width (F)
- 20.2mm
-
SizeConventionally sized servo names
- Standard
-
Gear Material
- Titanium
-
Waterproof Casing
- No
-
Servo Spline Count
- 25Tooth
-
Input Voltage Range
- 4.8V, 6V
-
4.8V Torque kg/cm
- 16
-
4.8V Sec/60 Degrees
- 0.18
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 20
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.15
-
Signal Type
- Digital
-
Drive Motor Type
- Coreless
-
Case Material
- Aluminium
-
Rotational Degrees
- 120° (Normal)