This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles).

• Operating Voltage: 6v

• Speed: 0.25 sec/60 degrees

• Torque: 8.5kg-cm

• Servo Spline: 25T

• Weight 58g

&nbspServos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

• Total Height (A) = 46.5mm

• Body Width (B) = 40mm

• Below Mount (C) = 31.5mm

• Above Mount (D) = 15mm

• Total Length (E) = 55mm

• Total Width (F) = 20mm

Learn how to install a steering servo correctly to increase steering performance, and avoid stripping your servo gears out.