Traxxas Blue Sub Micro 2.5kg Waterproof Servo
Traxxas Blue Sub Micro 2.5kg Waterproof Servo
Traxxas 2065T waterproof sub-micro servo in signature blue — metal main gear, 2.5 kg-cm torque at 6V, ideal for tight spaces.
- Waterproof design for reliable performance in any environment
- Metal main gear for additional strength and durability
- Sub-micro size — perfect for tight installation areas
- 2.5 kg-cm torque at 6V with 0.20 sec speed
- Distinctive Traxxas blue colouring — genuine Traxxas part
Experience unmatched responsiveness and pinpoint steering control with the Traxxas 2065T waterproof sub-micro servo. Featuring a robust metal main gear, this miniature powerhouse shrugs off wear and tear while delivering precise actuation for even the most demanding manoeuvres. The 2065T's exceptional torque and waterproof design ensure reliable performance in any environment.
Note: Servos are powered by the ESC's output to the receiver. If you are using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience brown-outs where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver to smooth the current delivery. However, in some cases, you may need to install an external BEC.
- Metal main gear for additional strength
- Micro sizing makes this servo perfect for tight installation areas
- Stand out with the unique Traxxas blue colouring
- Genuine Traxxas part
- 1x Traxxas Blue Sub Micro 2.5kg Waterproof Servo
-
Torque (6V)
- 2.5 kg-cm
-
Speed
- 0.20 sec (6V)
-
Operating Voltage
- 6V
-
Weight
- N/A
-
Bearing Type
- Ball Bearing
-
Motor Type
- Brushed
-
Operating Temperature
- N/A
-
Refresh Rate
- N/A
-
Size
- Sub Micro
-
Total Height (A)
- 27mm
-
Body Width (B)
- 22.8mm
-
Below Mount (C)
- 14.5mm
-
Above Mount (D)
- 12.5mm
-
Total Length (E)
- 29.7mm
-
Total Width (F)
- 12.8mm
-
Height (A)
- 27mm
-
Body Length (B)
- 22.8mm
-
Bottom to Under Mount (C)
- 14.5mm
-
Top to Under Mount (D)
- 12.5mm
-
Length (E)
- 29.7mm
-
Width (F)
- 12.8mm
-
SizeConventionally sized servo names
- Sub Micro
-
Gear Material
- Plastic & Metal
-
Waterproof Casing
- Yes
-
Servo Spline Count
- 25Tooth
-
Input Voltage Range
- 6V
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 2.5
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.20
-
Signal Type
- Digital
-
Drive Motor Type
- Brushed
-
Case Material
- Plastic
-
Rotational Degrees
- 120° (Normal)