&nbspServos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

The SW-1250MG Plus is a top-of-the-line waterproof, ultra-torque digital mini servo specifically designed as the ultimate upgrade for Traxxas 1/16 scale applications. Its inclusion in the "Plus" series elevates its capabilities with the addition of Soft Start for smoother operation and Sanwa SSR compatibility for expanded compatibility.

• The metal gearing provides incredible strength and longevity

• The full aluminium design helps provide a high level of protection and assists in keeping the servo cool

• Plus series includes Soft start and Sanwa SSR compatibility

• Ideal as a replacement for Traxxas 1/16 RC vehicles

• Spline size: 25T

• Servo Technology: Digital

• Operating Voltage: 6V - 8.4V

• Motor Type: Coreless

• Weight: 29.6g

• Gear Type: Metal Gears

• Refresh Rate: N/A

• Servo Case: Plastic

• Torque @ 6V: 5 kg-cm (69.4 oz-in)

• Torque @ 7.4V: 8 kg-cm (111.1 oz-in)

• Torque @ 8.4V: 10 kg-cm (138.9 oz-in)

• Speed @ 6V: 0.12 sec/60 deg

• Speed @ 7.4V: 0.10 sec/60 deg

• Speed @ 8.4V : 0.08 sec/60 deg

• Connector type: JR/Futaba

• Total Height (A) = 36.85mm

• Body Width (B) = 29.5mm

• Below Mount (C) = 23.85mm

• Above Mount (D) = 13mm

• Total Length (E) = 40mm

• Total Width (F) = 15mm

In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.