Savox Orange Aluminium 3.9kg 6v Plus Micro Metal Geared Servo
Savox Orange Aluminium 3.9kg 6v Plus Micro Metal Geared Servo
 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Conquer demanding tasks with the Savox SH-0255MG Plus micro servo. This powerhouse packs a punch with torque comparable to larger servos, making it ideal for high-performance applications. Metal gears ensure long-lasting durability, and digital technology delivers accurate and responsive control. Soft Start and Sanwa SSR compatibility add to its functionality and convenience. Take your RC projects to the next level with the Savox SH-0255MG Plus.
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
- Uniquely anodised in orange
- Aluminium Centre case helps protect and keep the servo cool
- Features soft start and Sanwa SSR compatibility
- Features Metal gearing for enhanced durability compared to plastic geared servos
- Suitable for small aeroplanes and 450 size helicopters
- Spline size: 21T Spline
- Servo Technology: Digital
- Operating Voltage: 4.8V - 6V
- Motor Type: Coreless Motor
- Weight: 64g
- Gear Type: Metal Gears
- Refresh Rate: 333 Hz
- Total Height (A) = 32.3mm
- Body Width (B) = 22.8mm
- Below Mount (C) = 20.82mm
- Above Mount (D) = 11.48mm
- Total Length (E) = 32.4mm
- Total Width (F) = 12mm
| Description | QTY |
|---|---|
| Savox Orange Aluminium 3.9kg 6v Plus Micro Metal Geared Servo | 1 |
-
Servo Spline Count
- 21Tooth
-
Total Length
- 32.4mm
-
Total Width
- 12mm
-
Bottom to Under Mount
- 20.82mm
-
Top to Under Mount
- 11.48mm
-
4.8V Sec/60 Degrees
- 0.16
-
Drive Motor Type
- Brushed
-
Rotational Degrees
- 120° (Normal)
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.13
-
Signal Type
- Digital
-
Case Material
- Aluminium
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 3.9
-
Gear Material
- Metal
-
Waterproof Casing
- No
-
Input Voltage Range
- 4.8VV, 6VV
-
Total Height
- 32.3mm
-
Body Length
- 22.8mm
-
4.8V Torque kg/cm
- 3.1
-
SizeConventionally sized servo names
- Micro