Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

The MKS Silver/Red S0017001 packs impressive torque and rapid response into a compact, lightweight package. Perfect for space-limited applications in small-scale RC models where performance matters.

• Compact and lightweight for micro applications

• Responsive with fast speeds

• Durable metal gears

• Coreless motor for efficiency

• Wide operating voltage range

• Genuine MKS Product

• Torque(4.8V): 2.44 kg-cm / 33.9 oz-in

• Torque (6.0V): 3.05 kg-cm / 42.4 oz-in

• Speed: 0.066 s (4.8V) / 0.053 s (6.0V)

• Weight: 21.21 g (0.75 oz)

• Operating Voltage: 4.8V ~ 7.0V DC

• Bearing Type: Dual Ball Bearing

• Motor Type: Coreless

• Operating Temperature: N/A

• Refresh Rate: 333Hz

• Total Height (A) = 29.85 mm

• Body Width (B) = 23 mm

• Below Mount (C) = 19.9 mm

• Above Mount (D) = 9.95 mm

• Total Length (E) = 31.45 mm

• Total Width (F) = 12 mm

In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.