Overview

Note

Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Specifications

	TRA-2075X Servo Specifications
Total Height (A)	42.5mm
Body Width (B)	40.2mm
Below Mount (C)	27mm
Above Mount (D)	15.5mm
Total Length (E)	54.8mm
Total Width (F)	19.7mm

Servo

SizeConventionally sized servo names	Standard
Gear Material	Metal
Servo Spline Count	25Tooth
Waterproof Casing	Yes
Case Material	Plastic
Height (A)	42.5mm
Body Length (B)	40.2mm
Bottom to Under Mount (C)	27mm
Top to Under Mount (D)	15.5mm
Length (E)	54.8mm
Width (F)	19.7mm
Drive Motor Type	Brushed
Rotational Degrees	120° (Normal)
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline	9
6V Sec/60 DegreesSeconds per 60 degrees of rotation	0.17
Signal Type	Digital