ARRMA Standard ADS-7M V2 7Kg Waterproof Metal Geared Servo
ARRMA Standard ADS-7M V2 7Kg Waterproof Metal Geared Servo
ARRMA ADS-7M V2 waterproof metal geared servo — 7kg/cm torque, dual ball bearing, Futaba-style connector, Industry Standard size.
- Fast and precise steering response
- Water-proof and dust-proof red case
- Metal gears with dual ball bearing
- 7kg/cm (97oz/inch) torque at 7.2V
- 'Futaba style' 3 pin connector
The ADS-7M V2 Servo is designed to give you fast and precise steering. Resilient to the elements and built from hard-wearing materials.
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
-
Case
- Red, water-proof and dust-proof
-
Bearing
- Dual ball bearing
-
Connector
- 'Futaba style' 3 pin connector
-
Gears
- Metal
-
Spline
- 25 Tooth
-
Dimensions
- 40mm x 38mm x 20mm (excluding mounting tabs), Industry Standard size
-
Wire length
- 300mm
-
Torque
- 7kg/cm (97oz/inch) at 7.2V
-
Speed
- 0.14 sec / 0.12 sec at 6V / 7.2V
-
Signal
- Analogue
-
SizeConventionally sized servo names
- Standard
-
Gear Material
- Metal
-
Waterproof Casing
- Yes
-
Servo Spline Count
- 25Tooth
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 7
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.14
-
Signal Type
- Analog
-
Case Material
- Plastic
-
Rotational Degrees
- 120° (Normal)