Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Built for demanding applications, the Savox SV-1270TG Plus servo delivers exceptional speed, high torque, and smooth operation. Ideal for 1/8 scale vehicles, it also features soft start and Sanwa SSR compatibility for enhanced control and convenience.

In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.

• Water resistant design so you can use in any conditions

• Aluminium Centre case helps protect and keep the servo cool

• Features soft start and Sanwa SSR compatibility

• Features super strong Titanium gearing for peak durability

• Suitable for large scale aeroplanes and 1/8 vehicles

• Uniquely anodised in orange

• Spline size: 25T Spline

• Servo Technology: Digital

• Operating Voltage: 7.4V - 8.4V

• Motor Type: Coreless Motor

• Weight: 64g

• Gear Type: Titanium Gears

• Refresh Rate: 333 Hz

• Total Height (A) = 37.2mm

• Body Width (B) = 40.3mm

• Below Mount (C) = 24.4mm

• Above Mount (D) = 12.8mm

• Total Length (E) = 54.0mm

• Total Width (F) = 20.2mm