HPI 1/5th SFL-11MG 24.7kg Metal Geared Servo
HPI 1/5th SFL-11MG 24.7kg Metal Geared Servo
Servos are powered by the ESC's output to the receiver. If you are using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience brownouts where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver to smooth the current delivery. In some cases, you may need to install an external BEC.
-
Part
- HPI-102772
-
Total Height (A)
- 64mm
-
Body Width (B)
- 66mm
-
Below Mount (C)
- 44mm
-
Above Mount (D)
- 20mm
-
Total Length (E)
- 83mm
-
Total Width (F)
- 30mm
-
Height (A)
- 64mm
-
Body Length (B)
- 66mm
-
Bottom to Under Mount (C)
- 44mm
-
Top to Under Mount (D)
- 20mm
-
Length (E)
- 83mm
-
Width (F)
- 30mm
-
SizeConventionally sized servo names
- 1/5
-
Gear Material
- Metal
-
Waterproof Casing
- No
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 24.7
-
Drive Motor Type
- Brushed
-
Case Material
- Metal
-
Rotational Degrees
- 120° (Normal)
Parts
5 out of 5 stars