Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Specifications
Spline Diameter
8.6mm
Specification
ROV-63016 Servo Specifications
Total Height (A)
61mm
Body Width (B)
59mm
Below Mount (C)
41mm
Above Mount (D)
20mm
Total Length (E)
75.5mm
Total Width (F)
29mm
Servo
SizeConventionally sized servo names
1/5
Gear Material
Metal
Waterproof Casing
No
Case Material
Metal
Height (A)
61mm
Body Length (B)
59mm
Bottom to Under Mount (C)
41mm
Top to Under Mount (D)
20mm
Length (E)
75.5mm
Width (F)
29mm
Rotational Degrees
120° (Normal)
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
40
6V Sec/60 DegreesSeconds per 60 degrees of rotation