Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

• Torque (6.0V): 55kg-cm

• Torque (8.4V): 65kg-cm

• Speed: 0.19 sec per 60° (6V)

• Speed: 0.17 sec per 60° (8.4V)

• Operating Voltage?6.0 ~ 8.4V DC Volts

• Weight: 200 g

• Gear Type: Steel

• Horn Gear Spline: 15T - ? 7.6mm 

• Bearing Type: Ball Bearing x 2

• Operating Temperature: -10? ~ 50?

• Operating travel: 90° (1000-2000 ?sec)

• Neutral Position?1500 ?sec

• Maximum travel: Approximately 135° (when 800-2200  ?sec)

• Mounting Hardware

If being used in a Rovan 5B, you will need this servo mount for proper fitment.

• Total Height (A) = 64.2mm

• Body Width (B) = 66mm

• Below Mount (C) = 39.7mm

• Above Mount (D) = 24.5mm

• Total Length (E) = 81.6mm

• Total Width (F) = 30mm