Power HD Standard LW-20MG 20kg Metal Geared Waterproof Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
The Power HD LW-20MG 20kg servo will work for most 1/10 and 1/8 RC cars and is particularly popular in the rock crawling and 1/8 off road categories.
This servo has metal (brass and copper gears) if you have a very high load application such as a rock crawler without a servo saver, we recommend the 23kg servo which has metal (steel and titanium gears) that are stronger.
- Total Height (A) = 44.6mm
- Body Width (B) = 40.6mm
- Below Mount (C) = 28mm
- Above Mount (D) = 16.6mm
- Total Length (E) = 54.2mm
- Total Width (F) = 20.5mm
Learn how to install a steering servo correctly to increase steering performance, and avoid stripping your servo gears out.
|Servo Spline Count:||25|
|6.0V Torque kg/cm:||20|
|6.0V Sec/60 Degrees:||0.16|