Recommended Products

Power HD Black Aluminium 25T Servo Horn

5 reviews

$8.62

Power HD Servo Glitch Buster Receiver Capacitor

3 reviews

$7.26

Description

The Power HD S range has been specially designed for the high demands required in all classes of racing including 1/10 & 1/8th off road. The latest technology allows these servos to operate in SSR mode (Super Speed Response) allowing a natural feel and instant feedback on track. The new design has more accurately machined gears than ever before, offering more precision and reliability to meet the ever increasing demands of the competition racing market.

Features

Low Profile
Full CNC Machined metal high-grade oxygen shell
7075+303 Titanium & Steel gearing
Japan NOBLE potentiometer
High pressure brushless
Compatible with 6.0–8.4v voltage
Upgraded PCB, support SSR, SUR super high speed mode
Available in two-toned anodised Silver, Red & Gold colours

Included Items

1x Silver Storm S15 Low Profile Brushless 16.5kg 8.4v Metal Geared Servo
1x Hardware Set
1x Decal Sheet

Note

Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience brown-outs where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver. However, in some cases, you may need to install an external BEC.

Videos

Specifications

Torque (6.0V): 11.5 kg-cm (159.7 oz/in)
Torque (7.4V): 15.0 kg-cm (208.3 oz/in)
Torque (8.4V): 16.5 kg-cm (229.1 oz/in)
Speed: 0.072 sec (6.0V) / 0.060 sec (7.4V) / 0.050 sec (8.4V)
Operating Voltage: 6.0–8.4 DC Volts
Weight: 52.0 g (1.83 oz)
Bearing Type: Ball Bearing x 2
Motor Type: Brushless Motor
Gear Type: Titanium & Steel
Operating Temperature: -20°–60°
Working Frequency: 1520µs / 333Hz
Size: 41.0 x 20.0 x 26.0 mm (1.61 x 0.79 x 1.02 in)
Total Height (A): 32mm
Body Width (B): 41mm
Below Mount (C): 16.7mm
Above Mount (D): 15.3mm
Total Length (E): 54.4mm
Total Width (F): 20mm

Servo

Height (A): 23mm
Body Length (B): 41mm
Bottom to Under Mount (C): 16.5mm
Top to Under Mount (D): 15.3mm
Length (E): 54.4mm
Width (F): 20mm
Size Conventionally sized servo names: Standard
Gear Material: Metal
Waterproof Casing: No
Servo Spline Count: 25Tooth
6V Torque kg/cm Kilograms of torque at 25mm away from the center of the spline: 16.5
6V Sec/60 Degrees Seconds per 60 degrees of rotation: 0.072
Signal Type: Digital
Drive Motor Type: Brushless
Case Material: Metal
Rotational Degrees: 120° (Normal)