Power HD Brand: Power HD
In Stock | QTY: 10+
Excluding GST: $37.90

Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo (usually greater than 20kg) than the ESC can support, you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver, smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Power HD LF-13MG Servo Specifications
  • Total Height (A) = 43.5mm
  • Body Width (B) = 40.1mm
  • Below Mount (C) = 26.6mm
  • Above Mount (D) = 15.6mm
  • Total Length (E) = 54.4mm
  • Total Width (F) = 20.2mm
RC Hobby Servo Specifications

How to Install a Servo

Learn how to install a steering servo correctly to increase steering perfomance, and avoid stripping your servo gears out.

Servo Size Standard
Servo Spline Count 25
Waterproof Casing Yes
Gear Material Metal
Torque kg/cm 13
Signal Type Digital
6.0v Sec/60 Degrees 0.12
"A" Measurement 43.5
"B" Measurement 40.01
"C" Measurement 26.6
"D" Measurement 15.6
"E" Measurement 54.4
"F" Measurement 20.2

Write a review

Note: HTML is not translated!
    Bad           Good
Related Products