UDI 1/16 Coleoptera Electric Brushless On Road RTR RC Drift Car
Brand: UDI RC
|
SKU: UD1608-PRO
Recommended Products
Description
1:16 Scale High Performance 4WD Racing Car
The UD1607-Pro comes with a gyroscopic electronic stability control system for ultimate control. With twos sets of tyres that can be easily swapped for grip & drift driving, it is a versatile on road RC car that can reach speeds over 40km/h!
Key Features
Electronic Stability Program
When the trucks driving occurs side slip or out of control,it can timely and effectively correct the car
attitude and direction. The function and sensitivity of gyroscope sensor can be adjusted and turn off by
the ESP knob of the transmitter.
High Speed Bearings (The Whole Car)
The whole vehicle uses ball bearings to improve the mechanical transmission efficiency. With ball
bearings, the friction during power transmission is reduced, the transmission efficiency of mechanical
power is improved, and mechanical damage is reduced at the same time.
Planetary differential
High-strength nylon planetary differential (can be upgraded to metal differential), strong and
wear-resistant, more stable in curve driving.
Waterproof ESC w/ Integrated Gyroscope
The 4ch 2.4Ghz ESC has a water & dust-proof design and includes Electronic Stability Program. Low
voltage cutoff, thermal overload protection and brake, BED, LVC sensitivity customisation are also
featured.
Powerful Brushless Motor
The 3900Kv brushless motor with the finned can design offers power & greater heat dissipation.
LED Headlights
LED Headlights with 3 Light modes.
Grip & Drift Tyres
The vehicle comes with two sets of tyres to suit on road grip & drift racing and can be easily
swapped out.
High Power 2S LiPo Battery
Included is a 7.4V 1200mAh (8.88Wh) rechargeable Li-Po battery.
2.4Ghz 4ch Transmitter
The 2.4Ghz transmitter can control the headlights & Electronic Stability System, along with
steering range & trim and out-of-control/range protection.
Features
- Electronic Stability Program system
- Full ball bearings
- High-strength planetary differential
- Waterproof ESC with gyroscope
- 3900Kv brushless motor
- Metal Universal CVD drive shafts
- Foam front bumper
- LED head & taillights
- Wheel hexes included faux brake discs
- Front & Rear shocks
- Drift & Grip tyre set
- Includes high-power 2S LiPo battery
Specifications
- Assembly time: Less than half an hour
- High Speed Bearings: The whole car
- Battery: Include
- Remote Control Distance: about 60m
- Playing Time: about 15 minutes
- Battery capacity: 7.4V, 1200mAh
- Charger: Include
- Completion Level: Ready-to-run
- Differential: Two oil-filled gears
- Drivetrain: Four Wheel Drive
- Drive Type: Forward/Brake/Reverse
- Final drive ratio: 6.05:1
- Front wheel track: 3.98 inch(101mm)
- Power Type: Electric
- Tooth pitch: 0.5 / 0.7 / 1.0MOD
- Internal gear ratio: 2.8:1.1
- Motor type: brushed motor/brushless motor
- Gear: 16T
- Product Length: 11.81?(300mm)
- Product Width: 5.91?(150mm)
- Product Height: 3.93?(100mm)
- Product Weight: 635.5g
- Transmitter: Include
- Rear wheel track: 3.98?(101mm)
- Receiver: Include
- Scale: 1/16
- Servo: Include
- Speed controller: Include
- Spur gear: 38T
- Suspension: Independent
- Truck type: Road Racing
- Wheel base: 6.69?(170mm)
Included items
Description | QTY |
---|---|
On Road RC Car with ESC and Motor | 1 |
User Manual | 1 |
2.4GHz Transmitter | 1 |
Maintenance tools | 1 |
Rechargeable battery | 1 |
USB Charger | 1 |
Drift tyres | 4 |
Required Items
Specifications
RC Car | |
---|---|
Max LiPo Power: | 2S (7.4v) |
Completion: | Ready to Run |
Scale: | 1/16 |
Skill Level: | Beginner |
Power Source: | Electric Brushless |
Chassis Type: | Drift |
On/Off Road: | On Road |
Drivetrain: | 4WD |
Factory specs | |
---|---|
Battery connector: | |
Max LiPo power: | |
Front shock oil: |
Reviews
0 reviews