Maverick MS-241 Standard 20kg Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Experience control like never before with the Maverick MS-241. Designed for reliability and performance, this servo delivers 20kg of torque for accurate and responsive RC action. Built tough to handle any terrain, it's your trusted companion for your RC adventures. Get the Maverick MS-241 and take your RC experience to new heights.
- With a robust 20kg torque rating, this servo provides the power needed for a variety of RC applications
- Standard sizing to allow it to fit into a wide range of RC vehicles
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
Servo Dimensions
- Total Height (A) = N/A
- Body Width (B) = N/A
- Below Mount (C) = N/A
- Above Mount (D) = N/A
- Total Length (E) = N/A
- Total Width (F) = N/A
- Torque(4.8V):N/A
- Torque(6V): N/A
- Torque(7.4V):N/A
- Torque(8.4V): N/A
- Speed: N/A
- Operating Voltage: N/A
- Weight: N/A
- Bearing Type: Ball Bearing
- Motor Type: N/A
- Operating Temperature: N/A
- Refresh Rate: N/A
- Size: Standard
| Description | QTY |
|---|---|
| Maverick MS-241 Standard 20kg Servo | 1 |
| Servo | |
|---|---|
| Size: | Standard |
| 6.0v Torque: | 20kg |
| 6.0v Speed: | |
| Waterproof Casing: | No |
| Servo Spline Count: | 25tooth |
| Signal Type: | Digital |
| Input Voltage Range: | |
| Case Material: | |
| Rotational Degrees: | 120o (Normal) |
| Total Height: | |
| Body Length: | |
| Bottom to Under Mount: | |
| Top to Under Mount: | |
| Total Length: | |
| Total Width: | |
| 4.8V Torque kg/cm: | |
| 7.4V Torque kg/cm: | |
| 8.4V Torque kg/cm: | |
| 4.8V Sec/60 Degrees: | |
| 7.4V Sec/60 Degrees: | |
| 8.4V Sec/60 Degrees: | |
| 12V Sec/60 Degrees: | |
