RPM Mirror Turbos take the lack of symmetry out of twin turbo set-ups by utilising one clockwise rotating turbo and one counter-clockwise rotating unit, leaving the engine bay clean and balanced compared to a standard twin turbo set-up.

Now you can show off a mirror turbo system in your favourite 1:8 – 1:12 scale ride with a pair of RPM Mirror Turbos prominently perched on your hood. Each kit comes with both a left side and right side turbo unit. Each unit is a 4-piece design that includes a turbo base plate and lock plate. The final piece is selectable — a pair of mock air filters and a separate pair of mock velocity stacks — so you can opt for either a race or street set-up.

RPM Mirror Turbos are sold in a mixed colour palette. The turbos and velocity stacks are silver/chrome while the base plates and air filters are black.

• Fits many 1:8 – 1:12 scale bodies
• Comes with one left & one right side turbo unit
• Includes a pair of mock air filters and a separate pair of mock velocity stacks
• RPM recommends installing Mock Mirror Turbos on relatively flat hoods with minimal curves and contours
• RPM Turbos may be bolted directly to the hood without the use of the recessed plate but shorter mounting screws would be necessary

• 1x Left Turbo
• 1x Right Turbo
• 2x Velocity Stacks
• 2x Air Filters
• 1x Left Base Plate
• 1x Right Base Plate
• 2x Lock Plates
• 2x 3x8mm Fine Thread Countersunk Head Screws
• 2x 3x16mm Fine Thread Button Head Screws
• 4x 3x12mm Fine Thread Countersunk Head Screws
• 1x Sticker

• 3mm screws require a 2mm hex driver
• Holes need to be drilled into the body shell to attach turbos to the base plates