Kyosho Jetstream 888VE EP 36" Electric Brushless RTR RC Speed Boat
$709.09
FU_00.jpg "Fujitsu 1.5v AA Alkaline Batteries 4Pcs")
To ensure optimal performance and longevity of your RC Boat, it is recommended to clean and grease the driveshaft before your first run and after every use.
Experience the full force of 60km/h speed as soon as you open the box! The serious offshore racer features auto-recovery from capsize function!
Hit the maximum speed of approximately 60km/h with a 14.8V 4-cell Li-Po battery (sold separately). The high-performance EP Jet Stream 888VE Readyset has made minor changes using a newly developed brushless motor and ESC. In the event of capsizing, weight balance is changed by water entering the ballast room to right the hull to its normal posture and automatically drain out, allowing the boat to continue running. This unsinkable design removes the risk and worry of losing your boat if it flips over. The high-precision CNC aluminium intake rudder with bracket and the high-durability metal adjustable flaps with excellent wave resistance is retained. The upgraded power unit to KYOSHO SPEED HOUSE.
The combination of scaled-up water-cooled brushless motor (40x68mm) and upgraded 120A capacity KA120-91WC water-cooled waterproof brushless ESC brings more fun to run a racing boat than ever.
Features ballast compartments built into the hull's sides that redistribute weight balance, so the hull rights itself if capsized.
The tilt angle of the machine cut CNC aluminium variable bracket can be adjusted between 4? ? -4?. W bearing shaft support delivers high-efficiency power transfer.
Magnetic lock hatch open/closes without using any tools. Built-in waterproof radio box with double-hatch protects R/C system components from water. Servos are installed, and linkage set up is complete.
KYOSHO SPEED HOUSE TORX M4 Brushless motor and KA120-91WC ESC are pre-installed. Delivers efficient cooling to the motor while producing incredible torque and power.
Features wire drive that produces optimal propeller angle. Machine cut CNC aluminium rudder features a flip-up design to help avoid damage if contact is made.
Included 2.4GHz KT-231P+ transmitter automatically manages frequency bands and guarantees stable operation with fail-safe function.
- Pre-coloured FRP factory assembled hull reaches speeds of 60km/h.
- Pre-installed KYOSHO SPEED HOUSE TORX M4 brushless water-cooled motor (40x68mm, KV2000) generates excellent torque characteristics.
- Newly designed KYOSHO SPEED HOUSE KA120-91WC water-cooled, waterproof ESC.
- Unsinkable self-righting structure.
- Flip-up rudder design prevents damage if the boat contacts an obstacle.
- Equipped with a combination turn fin and trim tab with adjustable angle.
- Features stopper to prevent loss of shaft.
- Includes drip-proof rubber boots, aluminium servo mount, carbon nylon 3-blade propeller.
- Ready to run after you arrange LiPo battery.
- Length: 900mm (35.4")
- Width: 187mm (7.36")
- Height: 140mm (5.51")
- Weight: 1,780g (3.92lbs) - when 14.8V-4000mAh installed
- Motor: Pre-installed Kyosho Speed House Torx M4 Brushless Water-Cooled motor (40x68mm, KV2000)
- Battery: 4 cell 14.8V 3600-4000mAh LiPO (Super Plug specification, Sold Separately)
- Propeller: Carbon Reinforced Nylon D40 x P1.4 (3-Blade)
- ESC: Pre-installed Kyosho Speed House 120A KA120-91WC Water-Cooled, Waterproof Brushless ESC
- Servo: KS-4031-06W
- 1x Pre-Coloured Fully Assembled Hull
- 1x Water-Cooled Brushless Motor
- 1x Water-Cooled 120A ESC
- 1x 2.4GHz Syncro KT-231P Radio
- 1x Rudder Servo
- 1x Waterproof Clear Tape
- 1x Boat Stand
- 1x Spare Propeller
- 4 x AA Batteries For Transmitter
- LiPo Charger
- 4 Cell 14.8V 3600-4000mAh LiPO Battery (Super Plug Specification - Compatible Size: L138 x W46 x H33mm or Less/L162 x W46 x H25mm or Less?
Manual
| Boat | |
|---|---|
| Power Source: | Electric Brushless |
| Hull Type: | Deep V |
| Experience: | Intermediate |
| Factory specs | |
|---|---|
| Battery connector: | Deans |
| Max LiPo power: | 4S (14.8v) |
If you don't find the manual or information you are looking for, contact us for help.
