Tamiya 1/24 GF-01 Heavy Metal Dump Truck Electric Off Road RC Truck Kit
GF-01 Chassis
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. It utilizes a 'square' setup with similar tread and wheelbase lengths. Sealed gearbox is integrated into the frame and protects from dust and debris, while the built-in front and rear differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension and friction dampers plus a 2-piece tie rod steering setup with the servo on the left for excellent response. Furthermore, it has chrome-plated wheels to match the chassis, fitted with big 115mm diameter soft compound lug pattern spike tires, plus a rear support bar with roller to prevent the model from flipping.
- Chassis: GF-01 lightweight monocoque resin with wheelie bar to
- prevent flipping over backward during wheelies
- Drive: 4 wheel, dogbone driveline
- Motor: Tamiya Sport Tuned RS-540 brushed, center mounted
- Electronic Speed Control: TBLE-02
- Differentials: Bevel gear type
- Gearboxes: Sealed
- Cab and Rear Bed: Injection molded resin, bed may be displayed in flat or raised position by changing the position of the two stays and snap pins in the body mounts. It is not advisable to put objects in the rear bed, or drive the model with the bed elevated bed is not remote controlled
- Front Bumper: Spring loaded
- Shocks: Plastic body friction, not oil-filled
- Suspension: Four wheel double wishbone
- The 4WD GF-01 chassis monocoque and (stays, bumper, wheelie bar, etc.) are metal-plated.
- Metal-plated wheels.
- Tires: Rubber, lug and pin spike 2.5" (65mm) wide, 4.5" (115mm) diameter
- Wheels: Orange plastic 1.9" (49mm) diameter, 2.3" (58.5mm) wide 12mm hex
- Steering: Bell crank type
- Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Length: 350mm
- Width: 270mm
- Height: 210mm
- Weight: Coming Soon
- Wheel Base: 174mm
- Ground Clearance: Coming Soon
- Drivetrain: 4WD
- Steering servo
- Remote controller
- Battery
- Charger
- Tools
Car | |
---|---|
Assembly Type: | Kit |
Max LiPo Power: | 2S (7.4v) |
Size (Scale): | 1/24 |
Skill Level: | Intermediate |
Power Source: | Electric Brushed |
Chassis Type: | Truck |
On/Off Road: | Off Road |
Drivetrain: | 4WD |
Factory specs | |
---|---|
Max LiPo power: | |
Battery connector: | |
Front shock oil: |