Savox Standard 46kg 7.4v Metal Geared Waterproof Servo
 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
This waterproof, steel-geared servo is perfect for Monster Truck and most Scaler and Crawler applications where a slightly taller servo can be fitted. Precision steel gears, stump-pulling torque, and waterproof to IP67 standards (operates for up to 30 minutes in water up to 3 feet deep).
- Center aluminum with nylon composite top and bottom case
- Operates directly on 7.4v without the need for an eternal BEC
- Precision ball bearings
- Total Height (A) = 50.15mm
- Body Width (B) = 40.6mm
- Below Mount (C) = 33.35mm
- Above Mount (D) = 12.8mm
- Total Length (E) = 54mm
- Total Width (F) = 20.7mm
Servo | |
---|---|
Size: | Standard |
6.0v Torque: | 46 |
6.0v Speed: | 0.17 |
Gear Material: | Steel |
Waterproof Casing: | Yes |
Servo Spline Count: | 25 |
Signal Type: | Digital |
Drive Motor Type: | Brushless |
Case Material: | Metal |
Rotational Degrees: | 120o (Normal) |
"A" Measurement: | 50.15 |
"B" Measurement: | 40.6 |
"C" Measurement: | 33.35 |
"D" Measurement: | 12.8 |
"E" Measurement: | 54 |
"F" Measurement: | 20.7 |